The BRAVO 1 With its cut-down barrel and eight vent holes, the Bravo I XS offers excellent time-to-plane performance, sweet mid-range punch, and awesome top-end speeds for bass, flats, cat flats, and performance center-console bay boats. The Bravo I XS shares the same barrel and blade design as the Bravo I FS, but has eight vent holes for added planing performance in two-stroke applications. The Bravo I XS can also be used with four-stroke engines when the vent holes are plugged.

• Equipped with Performance Vent System (PVS) allowing exhaust adjustment for planing
• Designed for 150-400 HP outboards primary target is Pro XS and XS engines, and now with the controllable venting system four stroke outboards may benefit with the one half pitch offerings.
• Excellent mid-range acceleration and the tuned exhaust tube provides bow and stern lift for awesome top end speeds
• Excellent prop for heavy and fully loaded walleye, bass, flats and some ultra-high speed bass boats
• According to the Mercury Propeller Handbook, it suggested that if replacing a 3-blade propeller you should move up 1" of pitch to maintain similar RPMs
• Also, according the Mercury Propeller Handbook, if replacing the Fury, Revolution 4, or standard Bravo I you should move up 2" of pitch to maintain similar RPMs.

• Hub kit sold separately, see the fitment information below to select the correct hub kit for your application.
• Right hand rotation propeller (clockwise rotation)

Mercury 135-400HP Outboards

• 135-400HP Outboards, 1978-Newer
• Use Hub Kit 835257K1 for all 2-Stroke outboards
• Use Hub Kit 8M0150151 for 135-225HP 4-Stroke outboards with 1.0" prop shaft
• Use Hub Kit 8M0101602for 225+HP 4-Stroke outboards with 1.0" prop shaft
• Use Hub Kit 8M0101601 for all 1.25" prop shaft applications (V8 Fourstroke & 350-450 Verado)

Mercury MerCruiser Alpha & Bravo One

• For all engines with an Alpha or Bravo One drive
• Use Hub Kit 835257K1for all applications less that 300HP
• Use Hub kit 835258K2for all application over 300HP with 1.0" prop shaft
• Use Hub Kit 840389K06 for all 1.25" prop shaft applications

Non-Mercury Outboards (4.75" Gearcase)

• Evinrude/Johnson/OMC (1991 and newer) - Use Hub Kit 8M0119081
• Evinrude/Johnson/OMC (1990 and older) - Use Hub Kit 8M0119082
• Evinrude E-TEC G2 (2015 and newer) - Use Hub Kit 8M0107220
• Honda 135-225HP - Use Hub Kit 835278Q1
• Suzuki 150-300HP - Use Hub Kit 835281Q1
• Yamaha 150-300 HP including SHO (2015 and newer) - Use Hub Kit 835274Q1
• Yamaha 200-250 HP SHO (2014 and older) - Use Hub Kit 8M0075402